To connect your Blast sensor, open the app menu, go to My Sensor, select your listed sensor, and shake it (logo down, then up) until it shows as connected.
iOS
- Tap Menu from the Analyze, Training, Live, or Swings screen.
- Tap My Sensor.
- Select the listed sensor.
- Shake the sensor: face the Blast logo toward the ground for two seconds, then toward the sky for two seconds, and repeat until it connects.
- The listed sensor will now show as connected.
Android
- Tap Menu from the Progress screen.
- Tap My Sensor.
- Select the listed sensor.
- Shake the sensor: face the Blast logo toward the ground for two seconds, then toward the sky for two seconds, and repeat until it connects.
- The listed sensor will now show as connected.
FAQ
My sensor won’t connect — what should I try? Make sure Bluetooth is on, the sensor is charged, and repeat the shake motion (logo down 2 seconds, logo up 2 seconds) until it registers as connected.
Do I need to reconnect my sensor every session? If your sensor disconnects or you switch devices, repeat the connection steps above from My Sensor.